Login | Register
Kazakh National Agrarian Research University ISSN 2304-3334 (Print)  ·  ISSN 2304-3334 (Online)
submit an article
Menu
submit an article
WATER, LAND AND FOREST RESOURCES

MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES

Aibek Koishygarin 1 , Moldir Bakhyt 1 , Zhandos Mukaliev 1

1 Al-Farabi Kazakh National University

doi.org/10.37884/2-2025/46 pp. 463-469 Admitted 07.04.2025 Published 30.06.2025

Abstract

This article explores modern approaches to monitoring and analyzing deformation processes in open-pit mining using automated control and measuring systems (ACMS). The study presents a conceptual and practical framework for integrating geotechnical sensors, geodetic monitoring, and finite element modeling into a unified decision-support system. A hypothetical case study of an open-pit mine in Eastern Kazakhstan is used to simulate stress–strain behavior under dynamic loading conditions. The modeling parameters and input data are described in detail, including assumptions on rock mechanical properties, boundary conditions, and external factors such as precipitation and excavation activity. Results show a potential 25–30% increase in deformation in critical zones within 5 years, confirming the need for predictive monitoring. The findings support the integration of ACMS and geomechanical simulation tools to reduce accident risks, improve forecast accuracy, and increase operational safety in complex geological environments.

deformation processes mountain ranges automated control and measuring systems monitoring, mining safety deformation forecasting geomechanical modeling

01 Introduction

The full text of the article is available for download in PDF format on the right panel.

02 References

  1. 1. Gordeev A. V., Ivanov S. P., Monitoring i prognozirovanie deformatsiy gornykh massivov [Monitoring and Forecasting of Rock Mass Deformations]. – Moscow: Publishing House "Gornaya Kniga", 2018. – 320 p.
  2. 2. Kuznetsov V. M., Petrov A. A., Avtomatizirovannye sistemy kontrolya v gornom dele [Automated Control Systems in Mining]. – St. Petersburg: Publishing House "Nedra", 2019. – 256 p.
  3. 3. Smirnov V. I., Fedorov R. N., Geomekhanicheskoe modelirovanie deformatsiy bortov kar'erov [Geomechanical Modeling of Quarry Slope Deformations]. – Novosibirsk: Publishing House of SB RAS, 2020. – 180 p.
  4. 4. Chernov O. I., Primenenie geoinformatsionnykh sistem v gornom dele [Application of Geographic Information Systems in Mining]. – Yekaterinburg: UGGU, 2017. – 210 p.
  5. 5. International Journal of Mining Science and Technology, «Advanced monitoring systems for slope stability in open-pit mines», vol. 30, no. 4, 2020. [Online]. – Available: https://www.sciencedirect.com/journal/international-journal-of-mining-science-and-technology
  6. 6. Li X., Zhang Y., «Real-time monitoring and early warning of slope deformation using IoT-based systems», Journal of Rock Mechanics and Geotechnical Engineering, vol. 12, no. 3, 2021. [Online]. – Available: https://www.sciencedirect.com/journal/journal-of-rock-mechanics-and-geotechnical-engineering
  7. 7. Pavlov A. N., Semenov V. V., Metody matematicheskogo modelirovaniya v geomekhanike [Methods of Mathematical Modeling in Geomechanics]. – Moscow: Publishing House "Gornaya Kniga", 2016. – 280 p.
  8. 8. *Rukovodstvo po monitoringu ustoichivosti bortov kar'erov [Guidelines for Monitoring the Stability of Quarry Slopes], ed. by V. P. Kozlov. – Moscow: Publishing House "Nedra", 2015. – 150p.
  9. 9. Smith J., Brown T., «Application of Finite Element Method in Slope Stability Analysis», Geotechnical Engineering Journal, vol. 45, no. 2, 2019. [Online]. – Available: https://www.geotechjournal.com
  10. 10. Tikhonov I. N., Grigoriev A. A., Sovremennye tekhnologii monitoringa deformatsiy v gornom dele [Modern Technologies for Deformation Monitoring in Mining]. – Krasnoyarsk: Publishing House of SFU, 2021. – 190 p.
  11. 11. Gusev A. A., Morozov K. V., Innovatsionnye tekhnologii v geomekhanike i monitoringe gornykh massivov [Innovative Technologies in Geomechanics and Rock Mass Monitoring]. – Moscow: Publishing House "Gornaya Nauka", 2022. – 210 p.
  12. 12. Wang L., Liu H., «Integration of Remote Sensing and GIS for Slope Stability Assessment in Open-Pit Mines», Remote Sensing Applications: Society and Environment, vol. 25, 2022. [Online]. – Available: https://www.sciencedirect.com/journal/remote-sensing-applications-society-and-environment
  13. 13. Kovalenko V. I., Lebedev A. S., Avtomatizatsiya protsessov kontrolya deformatsiy v gornoy promyshlennosti [Automation of Deformation Control Processes in the Mining Industry]. – Dnipro: Publishing House "Nauka i Obrazovanie", 2020. – 175 p.
  14. 14. Zhumataeva , J. ., Serikbaeva , G., Turganaliev , S. ., Mukaliev , J., & Rafikov, T. (2024). Increasing the ecological and economic efficiency of land resources use. Izdenister Natigeler, (2 (102), 360–369. https://doi.org/10.37884/2-2024/35
  15. 15. Rafikov, T., Erbolkyzy, M. ., & Zhildikbaeva, A. (2024). Application of earth remote sensing data and ndvi analysis in east kazakhstan region. Izdenister Natigeler, (1 (101), 183–191. https://doi.org/10.37884/1-2024/18

Citation Links

[1]2025. MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES. Izdenister natigeler. 2 (106) (Jun. 2025), 463–469. DOI:https://doi.org/10.37884/2-2025/46.
(1)MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES. Izdenister natigeler 2025, No. 2 (106), 463-469. https://doi.org/10.37884/2-2025/46.
MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES. (2025). Izdenister Natigeler, 2 (106), 463-469. https://doi.org/10.37884/2-2025/46
MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES. Izdenister natigeler, [S. l.], n. 2 (106), p. 463–469, 2025. DOI: 10.37884/2-2025/46. Disponível em: https://natsus.kaznaru.edu.kz/index.php/research/article/view/922. Acesso em: 15 sep. 2026.
“MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES”. 2025. Izdenister Natigeler, no. 2 (106) (June): 463-69. https://doi.org/10.37884/2-2025/46.
“MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES” (2025) Izdenister natigeler, (2 (106), pp. 463–469. doi:10.37884/2-2025/46.
[1]“MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES”, Izdenister natigeler, no. 2 (106), pp. 463–469, Jun. 2025, doi: 10.37884/2-2025/46.
“MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES”. Izdenister Natigeler, no. 2 (106), June 2025, pp. 463-9, https://doi.org/10.37884/2-2025/46.
“MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES”. Izdenister natigeler, no. 2 (106) (June 30, 2025): 463–469. Accessed September 15, 2026. https://natsus.kaznaru.edu.kz/index.php/research/article/view/922.
1.MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES. Izdenister natigeler [Internet]. 2025 Jun. 30 [cited 2026 Sep. 15];(2 (106):463-9. Available from: https://natsus.kaznaru.edu.kz/index.php/research/article/view/922
1.MODERN APPROACHES TO MONITORING AND ANALYSIS OF DEFORMATION PROCESSES. Izdenister natigeler. 2025;(2 (106):463-469. doi:10.37884/2-2025/46