Login | Register
Kazakh National Agrarian Research University ISSN 2304-3334 (Print)  ·  ISSN 2304-3334 (Online)
submit an article
Menu
submit an article
AGRICULTURE MECHANIZATION AND ELECTRIFICATION

DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE

Darkhan Orazakhyn 1 , Toktar Abilzhanuly 2 , Oljas Sayutov 3 , Frantisek Kumhala 4 , Ernur Rakhymbaev 1

1 Kazakh National Agrarian Research University; 2 LLP «SPC of Agroengineering»; 3 Taraz Regional University named after. M.H. Dulati; 4 Czech University of Life Sciences Prague

doi.org/10.37884/2-2024/46 pp. 461-472 Admitted 03.04.2024 Published 29.06.2024

Abstract

In order to determine the effect of corn stalks on combine blades, an experimental analysis was carried out under farm conditions. First, kummais was collected by cutting fresh corn from its growing area. The harvested corn stalks were analyzed for weight and length and accurate measurements were taken. Experimental work was carried out with a device for measuring the cutting ability of corn cobs according to established sizes. Its cutting force is determined using a device such as a cutting knife mounted on an iron shaft. That is, here we define the force F1 by the force F2. Uniformity is determined by calculating per 1 m2 of alfalfa, previously prepared for drying. Analysis of crushed mass without a counter-cutting row when harvesting dry alfalfa. We calculate the percentage of each amount received using the ratio and enter the result in the table. When the combine is idling, its rotation mechanisms are checked. They ensured that the mowing and cutting rotors rotate at the specified frequency and without touching other parts of the machine. At the same time, the operation of the combine was checked during the selection of artificial grass cutting in the territory of the center. Experimental studies on dry alfalfa were carried out on the farm in 3 replicates for each oncoming blade. The results of each analysis were tabulated. Using the same table, a graph was constructed showing the efficiency of particle size crushing depending on the number of counter bits.

forage harvester, deflector, mass speed, discharge range, speed

01 Introduction

The full text of the article is available for download in PDF format on the right panel.

02 References

  1. 1. Дет-лаф. А,А. 1973. Крс физика. – Москва: Высшая школа, 374 с.
  2. 2. Стрелков. С,П. Механик– Москва: Наука, 1976– 570
  3. 3. Справочник конструктор сельскох машины: 2 томах /под редакцей инжинер. Красниченков, А. В. – Том 1.– М, 1960.– 646 с .
  4. 4. Козлов В. М. Оптимизация процесса транспортировки измельченной массы в роторном кормоуборочном комбайне: автореф. дисс. на соискание ученой степени канд. техн. наук.– Москва, 2005.–22 с.
  5. 5. .[Электронный ресурс] URL: https://www.selhoz-ufa02.ru /goods/124690026-kombayn_kormouborochny_pritsepnoy_sterh_xd_2_
  6. 6. Марына А. А. Повышение эффективности процесса загрузки транспортных средств кормоуборочным комбайном путем оптимизации конструктивно–режимных параметров дефлектора: автореферат дисс. 0 На соискание ученой степени канд. техн. наук.– Саратов, 20007.–22 с.
  7. 7. Абилжанулы Т. Кормоприготовительные машины для крестьянских хозяйств и других агроформирований.– Астана: АО КазАТУ им С. Сейфуллина,2007. –201 с.
  8. 8. Тарг, С.М. 1986. Краткий курс теоретической механики. Москва: Высшая школа, 416 с.
  9. 9. Iskakov, R.M., Mamirbaeva, I.K., Gulyarenko, A.A., Silaev, M.Y., Gusev, A.S. 20022. Improved Hammers for Crushers in Feed Production. Russian Engineeing Research, 42 (10) pp. 986–994.
  10. 10. Iskakov, R., Sugirbay, A. 2023. Technologies for the Rational Use of Animal Waste: A Review. Sustainability, 15(3): https://doi.org/10.3390/su15032278.
  11. 11. Abilzhanuly, T., Iskakov, R., Abilzhanov, D. and Darkhan, O. 2023. Determination of the Average Size of Preliminary Grinded Wet Feed Particles in Hammer Grinders. Eastern-European Journal of Enterprise Technologies, 1(1 (121), 34–43. https://doi.org/10.15587/1729-4061.2023.268519.
  12. 12.Оразахын Д, Мал азығын жинауыш-ұсақтауышқа арналған жүгері сабағын шапқыш роторының параметрлерін негіздеу: PhD доктор академиялық дәрежесін алуға ұсынылған диссертация- Алматы 2024 49б

Citation Links

[1]2024. DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE. Izdenister natigeler. 2 (102) (Jun. 2024), 461–472. DOI:https://doi.org/10.37884/2-2024/46.
(1)DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE. Izdenister natigeler 2024, No. 2 (102), 461-472. https://doi.org/10.37884/2-2024/46.
DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE. (2024). Izdenister Natigeler, 2 (102), 461-472. https://doi.org/10.37884/2-2024/46
DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE. Izdenister natigeler, [S. l.], n. 2 (102), p. 461–472, 2024. DOI: 10.37884/2-2024/46. Disponível em: https://natsus.kaznaru.edu.kz/index.php/research/article/view/510. Acesso em: 15 sep. 2026.
“DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE”. 2024. Izdenister Natigeler, no. 2 (102) (June): 461-72. https://doi.org/10.37884/2-2024/46.
“DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE” (2024) Izdenister natigeler, (2 (102), pp. 461–472. doi:10.37884/2-2024/46.
[1]“DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE”, Izdenister natigeler, no. 2 (102), pp. 461–472, Jun. 2024, doi: 10.37884/2-2024/46.
“DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE”. Izdenister Natigeler, no. 2 (102), June 2024, pp. 461-72, https://doi.org/10.37884/2-2024/46.
“DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE”. Izdenister natigeler, no. 2 (102) (June 29, 2024): 461–472. Accessed September 15, 2026. https://natsus.kaznaru.edu.kz/index.php/research/article/view/510.
1.DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE. Izdenister natigeler [Internet]. 2024 Jun. 29 [cited 2026 Sep. 15];(2 (102):461-72. Available from: https://natsus.kaznaru.edu.kz/index.php/research/article/view/510
1.DETERMINATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF CORN EARLS AND PARAMETERS OF THE COMBINE. Izdenister natigeler. 2024;(2 (102):461-472. doi:10.37884/2-2024/46